Initializing The Settings For This Product; Storing The Unit - Yamaha STAGEPAS 200 Owner's Manual

Initializing the Settings for This Product

If you want to revert the settings for this product to the factory default settings, such as resetting the parameters that
were programmed from STAGEPAS Controller, or resetting the Bluetooth pairing (registering) information, follow the
steps below:
1
Turn the [P] (Standby/On) switch off.
2
While pressing and holding down the
[ ] (Bluetooth) switch and the MAIN
[FEEDBACK SUPPRESSOR] switch
simultaneously, turn the [P] (Standby/On)
switch on.
While holding these down...
During the initialization process, the [P] (Standby/On)
indicator, MAIN [FEEDBACK SUPPRESSOR] indicator, and
[ ] (Bluetooth) indicator will flash.
Make sure that they are flashing, and then release your
fingers from the switches.
3
When the initialization is complete, the
unit automatically restarts.

Storing the Unit

If you plan not to use the STAGEPAS 200BTR or STAGEPAS 200 for a long period of time, remove the battery from the
unit and store the unit and battery separately.
22
STAGEPAS 200BTR STAGEPAS 200 Owner's Manual
EFFECT
EQ/PRESET
MODE
MAIN LEVEL
FEEDBACK SUPPRESSOR ON
Bluetooth audio pairing
(registration) information
CHANNEL LEVEL
turn the
switch on.
LR-MONO SELECT
*1
MAIN EQ
MONITOR/LINK MODE
EFFECT ON
REVERB LEVEL
CHORUS LEVEL
DELAY LEVEL
REVERB TYPE/TIME
*1
CHORUS
*1
DELAY
*1
DUCKER
DEVICE NAME
*1
SCENE
PASSWORD
AUTO STANDBY
LAST MEMORY RESUME
*1 Parameters that can be controlled only from STAGEPAS Controller
Knob position
Knob position
Knob position
Knob position
Default (OFF)
All cleared
*1
Default (0 dB)
*1
Default (LR-MONO)
Default (FLAT)
Default (MONITOR MODE)
*1
Default (ON)
*1
Default (−3 dB)
*1
Default (−3 dB)
*1
Default (−3 dB)
Knob position
Default
Default
Default
*1
Default (STAGEPAS200)
Values for SCENE #1–8 are
cleared.
*1
Disabled
*1
Enabled
*1
Default (OFF)