Hyundai Grand i10 NIOS Owner's Manual page 66

Safety System
Installing a child restraint system by
lap/shoulder belt
To install a child restraint system on the
outboard or center rear seats, do the
following:
1. Place the child restraint system in
the seat and route the lap/shoulder
belt around or through the restraint,
following the restraint manufacturer's
instructions. Be sure the seat belt
webbing is not twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the distinct
"Click" sound.
Position the release button so that it is
easy to access in case of an emergency.
3-34
3. Buckle the seat belt and allow the
seat belt to take up any slack. After
E2MS103005 E2MS103005
installation of the child restraint
system, try to move it in all directions
to be sure the child restraint system is
securely installed.
If you need to tighten the belt, pull more
webbing toward the retractor. When you
unbuckle the seat belt and allow it to
retract, the retractor will automatically
revert back to its normal seated
passenger emergency locking usage
condition.
E2BLD310 E2BLD310
MMSA3030 MMSA3030