Hyundai Grand i10 NIOS Owner's Manual page 155

To reset the power windows
If the power windows do not operate
normally, the automatic power window
system must be reset as follows:
1. Place the ignition switch to the ON
position.
2. Close the window and continue pulling
up on the power window switch for at
least one second.
If the power windows do not
operate properly after resetting, it
is recommended that the system be
checked by an authorized HYUNDAI
dealer.
Power window lock switch
(if equipped)
The driver can disable the power window
switches on the rear passengers' doors
by pressing the power window lock
switch.
When the power window lock switch is
pressed:
• The driver's master control can
operate all the power windows.
• The front passenger's control can
operate the front passenger's power
window.
• The rear passenger's control cannot
operate the rear passengers' power
window.
05
OAI3059011 OAI3059011
5-27