6
|
Unit installation
Installer reference guide
30
5×
10 Drill a wall hole, depending on which side piping is taken out. See
4
drill a wall
hole" [
32].
11 Open the front panel and remove the front grille.
12 Remove the slit portions using nippers. See
4
portions" [
32].
13 If necessary for the skirting board, remove the slit portion on the bottom
frame.
a Bottom frame
b Slit portion
14 Align the unit using the alignment symbol
375 mm from the alignment symbol to the each side (unit width 750 mm),
487 mm from the alignment symbol to the bottom of the unit.
15 Hook the unit on the mounting plate and secure the unit to the wall using 4
screws M4×25L (field supply).
4×
a Alignment symbol
"6.3.3 To remove the slit
a
b
on the mounting plate:
a
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625991-1F – 2022.09
"6.3.2 To