Common Bmc Tasks; Changing The Bmc Login Credentials - Nvidia DGX A100 User Manual

Logs and Reports
Settings
Remote Control
Power Control
Chassis ID LED Control
Maintenance
Sign out
10.3. Common BMC Tasks
This section provides information about the most common BMC tasks.
10.3.1. Changing the BMC Login Credentials
Here is information about how you can add or remove users.
1. Select Settings from the left-side navigation menu.
2. Select the User Management card.
NVIDIA DGX A100
version, and number of retired pages for each
GPU.
View, and if applicable, download and erase, the
IPMI event log, and System, Audit, Video, and
POST Code logs.
Configure the following settings:
Captured BSOD, External User Services, KVM
Mouse Setting, Log Settings, Media Redirection
Settings, Network Settings, PAM Order Settings,
Platform Event Filter, Services, SMTP Settings,
SSL Settings, System Firewall, User Management,
and Video Recording
Opens the KVM Launch page to remotely access
the DGX A100 console.
Perform the following power actions:
Power On, Power Off, Power Cycle, Hard Reset,
and ACP/Shutdown
Lets you to change the chassis ID LED behavior:
Off, Solid On, Blinking On (select from 5 to 255
second blinking intervals).
Perform the following maintenance tasks:
Backup Configuration, Firmware Image Location,
Firmware Update, Preserve Configuration,
Restore Configuration, Restore Factory Defaults,
and System Administrator
Sign out of the BMC web UI.
Using the BMC
DU-09821-001 _v01 | 62