‣
admin
Username:
‣
dgxluna.admin
Password:
CAUTION: When you create a BMC admin user, we strongly recommend that you change the
default password for this user. Do not use the default password.
After the First Boot Setup
During the first-boot procedure, you were prompted to configure an administrator username
and password and a password for the BMC. The BMC username is the same as the
administrator username:
‣
<administrator-username>
Username:
‣
<bmc-password>
Password:
1. Make sure you have connected the BMC port on the DGX A100 system to your LAN.
2. Open a browser within your LAN and go to
3. Make sure popups are allowed for the BMC address.
4. Log in.
5. From the left-side navigation menu, click Remote Control.
The Remote Control page allows you to open a virtual Keyboard/Video/Mouse (KVM) on the
DGX A100 system, as if you were using a physical monitor and keyboard connected to the
front of the system.
NVIDIA DGX A100
https://%3Cbmc-ip-address%3E/
Connecting to the DGX A100
.
DU-09821-001 _v01 | 18