A.3.3. Configuring The Target Air-Gapped Dgx Os 5 System - Nvidia DGX A100 User Manual

Hide thumbs Also See for DGX A100:
Table of Contents

Advertisement

Building dependency tree
Reading state information... Done
249 packages can be upgraded. Run 'apt list --upgradable' to see them.
$
9. Upgrade the system using the newly configured local repositories.
sudo apt full-upgrade
$
If you configured
apt
sources.list.d/dgx-bionic-r450-cuda11-0-repo.list
upgraded to the R450 driver and the package sources are updated to obtain future updates
from the R450 driver repositories.
10.Optional: (For DGX OS Release 4.5 and later only) If you configured
DGX OS packages in the file
and want to use CUDA Toolkit 11.0, install it.
repo.list
sudo apt install cuda-toolkit-11-0
$
Note: If you did not configure
sources.list.d/dgx-bionic-r450-cuda11-0-repo.list
install CUDA Toolkit 11.0, the attempt fails.
A.3.3. 
Configuring the Target Air-Gapped DGX OS 5
System
The instructions in this section are to be performed on the target air-gapped DGX system.
The following are the prerequisites.
The target air-gapped DGX system is installed, has gone through the first boot process,
and is ready to be updated with the latest packages.
The USB storage device on which the mirrors were created is attached to the target DGX
system.
There are other ways to transfer the data that are not covered in this document as they will
depend on the data center policies for the air-gapped environment.
1. Mount the storage device on the air-gapped system to
consistency.
2. Configure the
apt (http://manpages.ubuntu.com/manpages/bionic/en/man8/apt.8.html)
command to use the file system as the repository in the file
modifying the following lines.
deb file:///media/usb/repository/mirror/security.ubuntu.com/ubuntu focal-security
main multiverse universe restricted
deb file:///media/usb/repository/mirror/archive.ubuntu.com/ubuntu/ focal main
multiverse universe restricted
deb file:///media/usb/repository/mirror/archive.ubuntu.com/ubuntu/ focal-updates
main multiverse universe restricted
3. Configure
apt
to use the NVIDIA DGX OS packages in the
file.
dgx.list
deb file:///media/usb/repository/mirror/repo.download.nvidia.com/baseos/ubuntu/
focal/x86_64/ focal main dgx
NVIDIA DGX A100
to use the NVIDIA DGX OS packages in the file
/etc/apt/sources.list.d/dgx-bionic-r450-cuda11-0-
to use the NVIDIA DGX OS packages in the file
apt
Installing Software on Air-Gapped DGX A100 Systems
/etc/apt/
, the NVIDIA graphics driver is
apt
, omit this step. If you try to
/media/usb/repository
/etc/apt/sources.list
/etc/apt/sources.list.d/
DU-09821-001 _v01   |   87
to use the NVIDIA
/etc/apt/
for
by

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents