If Using The Ipmi Sol Protocol; For Linux Desktop Users, Set The Character Encoding; Power On Or Reboot The System Using One Of The Following Interfaces, Depending On What The State Of The System Is - Nvidia DGX A100 User Manual

If using the IPMI SOL protocol:

1. When accessing the SBIOS configuration screen, be sure to use the 'xterm' terminal
emulator and character encoding is set to
2. Double-check the character encoding by running
For Linux desktop users, set the character
encoding:
1.
$ sudo localectl set-locale LANG=en_US.UTF-8
2. Type
export LANG=en_UTF-8
3. Type to launch the terminal with the set locale.
xterm
4. From within the new xterm, use ipmitool to connect to the DGX A100 SOL console:
ipmitool -I lanplus -H {IP Address} -U admin -P dgxluna.admin sol
activate
For Windows or Macintosh users
Configure terminal application for
Power on or Reboot the system using one of
the following interfaces, depending on what
the state of the system is:
1. Use the BMC User Interface to power on/reboot, OR
2. From the Operating System command line run
3. Using the following IPMI command:
-U {userid} -P {password} sol activate
terminal with the set locale.
4. Press DEL or F2 when the following message comes up as the system is booting.
5. The system should confirm your choice and will bring up the BIOS configuration screen.
NVIDIA DGX A100
en_UTF-8
echo $LANG
to set the locale for the current session
support
en_US.UTF-8
$ sudo reboot
$ sudo ipmitool -I lanplus -H {IP Address}
to access the SOL interface using the
SBIOS Settings
DU-09821-001 _v01 | 75