Table of Contents
Advertisement
BRKT-J23 Wall Mount Kit Installation Guide
4. Have another person hold the switch with the brackets at the location
where the switch is to be installed, while you use a pencil to mark the
wall at the locations of the four holes in the brackets. See Figure 5.
x
Figure 5. Marking the Screw Hole Locations
5. Pre-drill the marked locations on the wall marked in Step 4.
6. Install the four plastic anchors into the wall in the holes.
7. Position two brackets on the wall and screw the screws through the
holes to attach the brackets on the wall. See Figure 6.
x
Figure 6. Attaching the Brackets to the Wall
14
Advertisement
Table of Contents
