BRKT-J23 Wall Mount Kit Installation Guide
Unpacking the BRKT-J23 Wall Mount Kit
To unpack the BRKT-J23 wall mount kit, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that two brackets are included in your wall mount package listed
in Table 1.
Table 1. Components in the BRKT-J23 Wall Mount Kit
Two brackets
3. If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Components
12