Lithium Ion Storage Battery Block (R-Ch); Housing (R) Block, O-Ring (A) (R-Ch) - Sony WH-XB900N Service Manual

WH-XB900N
2-7.

LITHIUM ION STORAGE BATTERY BLOCK (R-ch)

Note: When replacing the lithium ion storage battery block,
refer to "CHECKING THE NEW LITHIUM ION
STORAGE BATTERY FOR BEFORE USE AND
NOTES ON HANDLING" on page 4.
2-8.

HOUSING (R) BLOCK, O-RING (A) (R-ch)

5 O-ring (A)
Note: Lubricant is applied to the O-ring (A)
parts for repair.
Be careful when handling the parts.
Also, it becomes parts for repair with
1 set of 4 pieces.
1 Open the short path hanger in the direction
of the arrow and pull out the shaft from the
hole of housing (R) block.
2 Draw out the relay cable
from the hole of housing
(R) block.
13
3 lithium ion storage battery block
(See Note)
– R-ch –
short path hanger
hole
hole
1 three screws
(2.0
2 Move the relay cable
to the outer side.
– R-ch –
long path hanger
3 Open the long path hanger in the direction
of the arrow and pull out the shaft from the
hole of housing (R) block.
5 O-ring (A)
Note: Lubricant is applied to the O-ring (A)
parts for repair.
Be careful when handling the parts.
Also, it becomes parts for repair with
1 set of 4 pieces.
4 housing (R) block
Sony CONFIDENTIAL
For Authorized Servicer
5.0 mm)
relay cable
SYS SET