Ear Pad - Sony WH-XB900N Service Manual

WH-XB900N
Note: Follow the disassembly procedure in the numerical order given.
2-2.

EAR PAD

Note 1: The left and right ear pads can be removed using the same procedure.
This explanation uses illustrations from the right side.
1 Remove the ear pad from
– –
rear
plate
front
plate
Attach in order from 1 to 2.
– –
protrusion
housing
groove
seam (lower side)
Note 2: The right ear pad seam is aligned with the
left ear pad seam. (Tolerance: 0 to 2 mm)
seam
9
the groove between of
front plate and rear plate.
2 ear pad
1 Align the positions of the protrusion
on the inner side of the housing
groove and the notch (top side) of
the ear pad.
notch (top side)
ear pad
(See Fig. A)
– – – –
– –
Note 4: When installing the ear pad, make sure
the seam faces downward.
notch
–
(top side)
seam
OK
No gap.
rear
plate
Note 3: The ear pad seam is at the center of the
USB connector. (Tolerance: 0 ± 1 mm)
–
seam
seam
–
Sony CONFIDENTIAL
For Authorized Servicer
–
top side
lower side
NG
Gap or protruding.
rear
plate
ear pad ear pad
2 Insert the ear pad into
the housing groove.
(one turn)
–
USB connector
guide line
(USB connector center)
–
SYS SET