Honda HSM1380i Owner's Manual page 73

Battery run system
Use the battery run system to drive the snowblower in case the engine
does not start.
− 1. Set the main shift lever in the N (neutral) position.
− 2. Release the drive clutch lever to set it in the STOP position.
− 3. Turn the engine switch to the ON position.
− 4. Squeeze the right and left steering levers simultaneously for
approximately 3 seconds.
DRIVE CLUTCH LEVER
STEERING LEVER (left)
− 5. Both the drive control warning indicator (red) and the drive control
warning indicator (orange) blink after squeezing the right and left
steering levers for approximately 3 seconds. Squeeze the drive
clutch lever when the indicators blink.
If the drive clutch lever and the main shift lever are not operated
within 5 seconds after the drive control warning indicators start to
blink, the indicators stop blinking but they stay on automatically.
The battery run system is automatically disarmed this time, which
prevents the snowblower from running with the battery power.
Return the engine switch to the OFF position and restart the
engine.
The battery run mode keeps on while the drive clutch lever is
squeezed.
DRIVE CONTROL WARNING
INDICATOR (red)
70
ENGINE SWITCH
STEERING LEVER (right)
DRIVE CONTROL WARNING
INDICATOR (orange)
MAIN SHIFT LEVER