Step 2.
Remove the heat sink.
Remove the thermal fan
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 33
Step 1.
Detach the thermal fan connector.
Figure 10. Detach the thermal fan connector
Screw specifications
M2.0 x 3
Step 2.
Remove 2 screws.
Step 3.
Remove the thermal fan.
Remove the CMOS battery
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 33
Step 1.
Pry up the CMOS battery.
38
Lenovo E41-55 Hardware Maintenance Manual
Number of screws
2