Screw specifications
M2.5 x 5.5
Step 2.
Lift up the hinge.
Step 3.
Unplug the DC-in cable.
Figure 17. Unplug the DC-in cable and remove the DC-in cable
Step 4.
Remove the DC-in cable.
Remove the LCD unit
Make sure the following FRUs (CRUs) have been removed. Also make sure the antenna cables have been
disconnected from the wireless module and taken out of the cable guiders.
"Remove the lower case" on page 33
"Remove the built in battery" on page 39
Step 1.
Remove 6 screws which secure the hinges to the upper case.
Number of screws
3
.
Chapter 6
Removing a FRU or CRU
43