Remove The Camera Cable - Lenovo E41-55 Hardware Maintenance Manual

Screw specifications
M2.5 x 2.5
Figure 29. Remove 8 screws
Step 3. Remove the hinges.

Remove the camera cable

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 33
"Remove the built in battery" on page 39
"Remove the LCD unit" on page 43
"Remove the LCD bezel" on page 48
"Remove the LCD panel" on page 48
Step 1. Peel off the sticker.
Step 2. Detach the connector.
Step 3. Peel off the sticker secures the camera cable.
Step 4. Remove the camera cable.
Number of screws
8
.
Chapter 6 Removing a FRU or CRU
51