Table of Contents
Advertisement
! CAUTION
dangers and indicate the risks of minor injuries for
the operator, or damage to the system, products
(plates) and installa ons, if they do not strictly
adhere to the safety instruc ons provided to avoid
such dangers.
Cau on labels generally have a yellow background.
1.9
storage
Keep away from:
•
Direct sunshine, rain, wind and sand.
•
Temperature: max. 140°F/min. 14°F
•
Max. rela ve humidity: 90%
1. 1 0 transport and handling
The carrier is always liable for any damage
caused to the products entrusted to them
during transport. Thus, before preparing the
unit for its installa on and commissioning,
it is necessary to carry out a complete visual
inspec on in order to check that the packing
cases are intact and the unit has no apparent
damage and that there is no oil or refrigerant
leakage. It is also important to verify that the
units are the ones that have been ordered.
Any damage or complaints must be reported
to nano-purifi ca on solu ons and declared
to the carrier (or shipper) before the carrier
leaves premises when product is delivered.
If there is damage to one or more compo-
nents, do not start the unit but inform na-
no-purifi ca on solu ons about the problem
to fi nd a mutually agreeable course of ac on.
Preferably, remove the packaging at the actual
place of installa on.
The unit should be handled with great care
on the premises. Do not use any of its compo-
nents as a grip. In order to avoid any damage,
it is impera ve that, during their handling,
cycling refrigerated air dryer
The "cau on"
messages provide
warning about real
9
1
R
the units always remain in the posi on set for
their opera on.
Do not leave the units in their packaging on
premises that are exposed to strong sunshine
because the ambient temperatures can aff ect
the triggering values of the safety devices.
The water circuit should be completely
drained before the unit is handled.
The equipment should be preferably li ed
using a forkli truck. Use a spreader bar if
belts or slings are used and ensure that there
is no pressure on the external edges of the
units or the packing case.
Advertisement
Table of Contents
