Qualified Operators - NANO NXC Series User Manual

1.7

qualified operators

Only the professionals stated below are authorized
to operate the unit a er having received all the
necessary instruc ons from this manual:
Specialized maintenance electrician
The electrician should have a general knowledge
about electrical appliances as well as specifi c
experience working with control boxes and the
electrical components of cooling units or similar
equipment from the domain of air-condi oning.
The electrician is authorized to carry out only
the specifi c opera ons stated in this manual by
me culously following the associated instruc ons.
Maintenance technician
The maintenance technician should have a general
experience working with mechanical elements and
a specifi c experience with cooling units or similar
equipment from the domain of air-condi oning.
The maintenance technician is authorized to carry
out only the specifi c opera ons stated in this manual
by me culously following the associated instruc ons.
Refrigera on technician
The refrigera on technician should be a refrigera on
cer fi ed from a technical ins tu on for similar
equipment or interven ons under the authority of
competent personnel.
The refrigera on technician is authorized to carry out
only the specifi c opera ons stated in this manual by
me culously following the associated instruc ons.
Transport operator
The transport operator can carry out only the specifi c
opera ons stated in this manual by me culously
following the associated instruc ons.
cycling refrigerated air dryer
7
R
Staff allocated for the start-up and shut-down of
the unit
(Basic operator and engineer operator)
A er having understood the informa on contained
in this manual, the basic operator will be authorized
to manually operate the unit at the level of the
following func ons: start-up, shut-down, display of
alarms.
In this case, this operator can carry out only
the specifi c opera ons stated in this manual by
me culously following the associated instruc ons.
Safety offi cer
The safety offi cer is responsible for protec on and
the preven on of occupa onal risks as set forth in
OSHA Direc ve (Safety in the workplace).
The safety offi cer shall make certain that all the
persons who operate the unit have received all
applicable instruc ons which are contained in
this manual, including the ini al installa on and
commissioning opera on.
1