Atag CX4771B Instructions For Use Manual page 165

Choosing the settings
STEP PROGRAM
This function allows baking in two steps or stages (two consecutive baking steps are combined in
a single cooking process).
A1 first cooking step STAGE1, (STAGE2)
C program duration/end of program (see chapter "Timer Functions")
E temperature/power
Step:STAGE1
In the mode, set the baking system and temperature. You can also choose the fast preheating
function. Then, set the baking duration for STAGE1 (see chapter Timer Functions). Confirm the
setting by pressing on the KNOB.
INFORMATION!
In STAGE1, you can set the delayed start; however, if you do so, you cannot activate fast
preheating.
Step:STAGE2
Press and hold the
one has already been set). Set the baking system, temperature, and duration. Confirm the setting
by pressing on the KNOB.
If you wish, you can also modify STAGE1 or STAGE2 before starting them.
Touch the
STAGE2.
To delete the step mode, press and hold the
key to start baking. The oven first starts to operate with the settings selected for STAGE1. When the
STAGE1 is done,STAGE2 is activated.
22
key. STAGE2 (second cooking step) will appear on the display unit (the first
key and select STAGE1. Now you can change the settings. Then, do the same for
key.