Advertisement
Step 4:
The Lower Plate has a flap which closely hugs
the rear peripheral wall of the Middle plate
and ensures the Orientation and alignment of
the plate clusters.
The Lower Plate has a Countersunk bore,
which flushes with the Countersunk head of
the Mounting screws from the bottom, as
shown.
Copyright By SRC
Design and Specification are subjected to change
Step 3:
Stack-up Lower Plate (1), as shown, and in-line
with the mounting holes of the Middle Plate.
Insert the Countersunk Screw M6 x 16 (5) – 4
off from the bottom side of the Lower Plate
(1), as shown.
Page 4
Advertisement
