Table of Contents
Advertisement
Installation (continued)
Installing the adjustment poles to the attachment plate
Follow the procedure given below to install the adjustment poles to the attachment plate which has been installed
to the ceiling.
Arrow
Attachment plate
inscription
FRONT
Adjustment pole
Ⓐ
Arrow
Attachment plate
inscription
FRONT
Ⓐ
Adjustment pole
Provisionally tighten
in 3 places.
1 Notice the shape of the protrusion on the adjustment
pole
A
, insert it into the center hole of the attachment
plate, and then rotate the adjustment pole
the
inscription on the adjustment pole
FRONT
aligned with the arrow on the attachment plate.
Attention
z Hold the adjustment pole
adjustment pole
A
plate and the rotating the adjustment pole
finished.
2 Overlap the 3 screw holes on the adjustment pole
with the 3 slots in the attachment plate, and then use
the 3 supplied captive washer hex head bolts to tem-
porarily secure them.
A
firmly until inserting the
A
into the hole of the attachment
ENGLISH - 9
, so that
A
is
are
A
A
Advertisement
Table of Contents
