Advertisement
Quick Links
S
F
P
E
C
I
L
Ceiling mount bracket
Description
This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W x H x D):
Weight:
Parts
Attachment plate
Projector mount bracket
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . 1
C a u t i o n :
•
All mounting work must be done by a qualified technician.
•
Ensure that the mounting (ceiling) area has sufficient strength.
•
Read the enclosed mounting instructions carefully before starting the mounting procedure.
•
When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.
•
Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.
Dimensions
Illustration shows the ET-PKE1000S attached to
the projector.
181
(7-1/8˝)
As of November 2006
E
+5°, -15°
±10°
±5°
468 x 200 x 191 mm (18-7/16˝ x 7-7/8˝ x 7-17/32˝)
1.9 kg (4.2 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
. . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . 1
Attachement plate
PT-AE1000
65
(2-9/16˝)
ET-PKE1000S
Washer-fitted screws (M4 x 8) . . . . . . . . . . . 10
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip
. . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube
. . . . . . . . . . . . . . . . . . . . . . . . . . .2
Attachment plate
Ø8.5
(11/32˝)
104 (4-3/32˝)
130 (5-1/8˝)
150 (5-29/32˝)
NOTE: This illustration is not drawn to scale.
Ø9.5 (3/8˝)
unit : mm (inch)
< 1 >
Advertisement
