Cmc22/Cmuc22 (Front-Mounted) - Waterous CM Series Installation Manual

Safety

CMC22/CMUC22 (Front-Mounted)

1
2
4
Feature Feature
1 Body assembly
2 Intake adapter
3 Intake mounting pad
4 Front support mounting hole
5 Transmission
6 Transmission spacer
7 Drive shaft
Introduction
Description Description
The body assembly consists of the volute body and volute cover.
This connects the pump to the water source.
This is where the installer-supplied angle bracket is attached to the pump.
This is where the installer-supplied front support bracket is attached to the pump.
This increases the speed of the pump and can transfer incoming power to either the pump or driveline. C22 transmissions
are available with both an input and output shaft or the input shaft only—input and output option shown.
This is placed between the transmission body and cap to create space for different drops and gear ratios—C drop with
2.27 ratio shown.
This connects the pump to the driveline.
Product Overview
3
7
7
|
14 56
Installation
2
5
6