Table of Contents
Advertisement
In the case of flush mounting, after placing the
adhesive seal (A) on the glass surface and after
positioning and securing the hob, fill the edges
with insulating silicone (B) and wipe off any
excess. If for any reason the hob needs to be
removed, cut the silicone using a cutter before
Standard and flush mounting (mm)
MODEL (cm)
60
70
Electrical connection
1. Standard mounting
2. Flush built-in model
Mounting
Over built-in oven unit
The clearance between the hob and the kitchen
units or other built-in appliances must be enough
to ensure sufficient ventilation and air discharge.
If installed above an oven, a space must be left
between the bottom of the hob and the top of
the appliance installed below.
91477A679/A
X
Y
555-560
478-482
555-560
478-482
attempting to remove it (C).
P
Q
603
513
753
513
• With opening on bottom:
F
G
88
317
88
317
INSTALLATION - 15
Advertisement
Table of Contents
