Fastening To The Built-In Cabinet - Smeg SI2641DUK Manual

• With opening on bottom and back:
On top of an empty kitchen unit or
drawers
If there are other pieces of furniture (lateral
walls,
drawers etc.), dishwashers or fridges under the
hob, a double-layer wooden base has to be
installed at least 20 mm from the bottom of the
hob to avoid any accidental contact. It must
only be possible to remove the double-layer
base by using suitable tools.
With opening on bottom:
With opening on back:
16 - INSTALLATION
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with sharp
or hot parts.
If installed on top of an oven, the latter
must be equipped with a cooling fan.

Fastening to the built-in cabinet

There are two fastening options depending on
the configuration of the unit in which the
appliance will be installed:
1 Through the side screws.
2 Through the front and rear screws.
To fasten the hob:
1. Unscrew the screws from the holes shown in
the following figures, according to the
fastening option chosen.
2. Fasten the fixing brackets (A) into the holes
marked using the screws that were removed
91477A679/A