Advertisement
Indicators
There are two indicator lights on the ESB8P screwdrivers.
The light nearer to the back of the tool [1] indicates the rundown status. When the
tool stops running, it will light up green if the target torque was hit and the clutch
deactivated the tool, indicating a good rundown. If the tool stops for any other reason,
it will light up red to indicate an improper rundown.
The other light [2] indicates speed setting and battery status. If the battery is running
low, it will light up red when the trigger is pressed.
Status
Idle
Screw reaches set torque, clutch activates
Trigger released before screw reaches set torque
Motor stalls, screw cannot reach set torque
Current protection
Temperature protection
Status
Idle for more than 5 seconds
Battery requires charge + trigger is pressed
ESB824P/828P/829P Cordless Screwdriver
Top Indicator Light [1]
Red
Red
Red
Red
Bottom Indicator Light [2]
Red
www.deltaregis.com
Operation Manual
Off
Green
(1 flash)
(3 flashes)
(6 flashes)
(9 flashes)
Off
(flashing)
[1]
[2]
Audible Beeps
-
-
1 Short
3 Short
6 Short
9 Short
Audible Beeps
-
2 Short, 1 Long
6
Advertisement
