Advertisement
ESB823/823F
Cordless Inline Screwdriver
Operation Manual
CAUTION — Please read, understand, and follow all operating and safety instructions in
this manual before using the ESB823 screwdriver.
If you have any questions or concerns, please contact us at:
Delta Regis Tools Inc.
7370 Commercial Circle
Fort Pierce, FL 34951
USA
Doc. ESB823_Manual_r0.0
Copyright © 2023 Delta Regis Tools Inc
Ph +1-772-465-4302
Fx +1-772-465-4368
Email: sales@deltaregis.com
Website: www.deltaregis.com
Advertisement
Table of Contents
Related Manuals for Delta Regis ESB823
Summary of Contents for Delta Regis ESB823
- Page 1 Cordless Inline Screwdriver Operation Manual CAUTION — Please read, understand, and follow all operating and safety instructions in this manual before using the ESB823 screwdriver. If you have any questions or concerns, please contact us at: Ph +1-772-465-4302 Delta Regis Tools Inc.
- Page 2 • Use only the factory specified Delta Regis brand replacement parts and accessories with these tools. • And damage to the tool, battery, and/or battery charger resulting from misuse, abuse, or failure to follow these guidelines will void the limited product warranty.
-
Page 3: Specifications
ESB823 Cordless Inline Screwdriver Operation Manual Read Manual Caution Recyclable Indoor Use Only Keep Away From Humidity Keep Away From Fire Do Not Disassemble Do Not Dispose Contents • Cordless inline screwdriver (1) • Accessory kit (1) - Suspension bail (1) - Phillips power bits (2) •... -
Page 4: Tool Overview
ESB823 Cordless Inline Screwdriver Operation Manual Tool Overview Suspension Bail Allows tool to be suspended from a spring balancer or similar device ESB-7VL2500/3000 Battery Provides power to the tool, slides into back (press button on battery to remove) Indicator Lights Indicate battery charge and rundown status (see pg. -
Page 5: Torque Adjustment
ESB823 Cordless Inline Screwdriver Operation Manual Quick Set-Up and Operation Overview 1. Fully charge the battery using the battery charger before first use to achieve maximum fastening cycles. Slide the battery into the end of the screwdriver. 2. Ensure that the screwdriver’s FWD/REV switch is ‘OFF’ (central position). While the switch is in this position, the tool’s speed can be toggled between high and low by pressing and holding the trigger switch for 5 seconds. - Page 6 Operation Manual Indicators There are two indicator lights on the ESB823 screwdriver. The light nearer to the back of the tool [1] indicates the rundown status. When the tool stops running, it will light up green if the target torque was hit and the clutch deactivated the tool, indicating a good rundown.
-
Page 7: Parts And Accessories
ESB823 Cordless Inline Screwdriver Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service This device is not user serviceable. Any repairs must be performed by a Delta Regis authorized service center. Please consult Delta Regis Tools for further information and the location of the nearest authorized service center.
Need help?
Do you have a question about the ESB823 and is the answer not in the manual?
Questions and answers