Related Manuals for Delta Regis ESL-XTE3 Series
Summary of Contents for Delta Regis ESL-XTE3 Series
- Page 1 ESL-XTE3(F)/5/7 Series Transducerized Control Tools USER MANUAL Delta Regis Tools Inc. 7370 Commercial Circle Fort Pierce, FL 34951 sales@deltaregis.com 1-888-500-2755 www.deltaregis.com Delta Regis_ESL-XTE3(F)/5/7_M_R0.0...
-
Page 2: Important Safety Precautions
Transducerized screwdrivers are designed for installing threaded fasteners in light industrial and appliance manufacturing applications. Delta Regis is not responsible for damage caused by customer modification of tools for applications on which Delta Regis was not consulted. WARNING Important safety information enclosed. - Page 3 SAVE THESE INSTRUCTIONS 1) Electrical Safety a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in a combustible atmosphere, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust and fumes. c) Keep children, and bystanders away while operating a power tool.
- Page 4 4) Power tool Use and Care a) Do not strain the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use power tool if switch does not turn it on or off.
- Page 5 a) Instruction for putting into use 1. Setting-up or fixing power tool in a stable position as appropriate for power tools which can be mounted on a support. 2. Assembly 3. Connection to power supply, cabling, fusing, socket type and grounding requirements.
-
Page 6: Grounding Instructions
GROUNDING INSTRUCTIONS 1. This tool should be grounded while in use to protect the operator from electric shock. NOTICE ! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors. -
Page 7: Operating Cautions
OPERATING CAUTIONS 1) Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or other similar chemicals to come in contact with the transducer screwdriver housing as damage will result. 2) Use the transducer screwdriver carefully, do not drop or hit against hard surfaces, it is always recomended to use this tool in an appropriate torque reaction arm. - Page 8 FUNCTION / OPERATION INTRODUCTION Number Name Description Hanging Hole Hanging hole is available, to hang the screwdriver Signal Light Display OK light, NG light, screw removal start and stop signal Button Switch Switch rotation direction CW/ CCW See DR-XTC1 Manual Housing Nut Secures housing assembly to the gear case...
- Page 9 4) Inspect tool cord periodically and if damaged, have them replaced by an authorized service facility. Inspect power cords periodically and replace if damaged. 5) Do not remove any labels. Contact Delta Regis for replacement labels. 6) To adjust the torque on these transducer screwdriver. Proceed as follows : Stop the transducer driver first and adjust it with the DR-XTC1 controller.
- Page 10 CAUTION 1. The use of other than genuine DELTA REGIS replacement parts may result in decreased tool performance and increased maintenance, and may invalidate all warranties. 2. All repairs and maintenance of this tool and its word must be performed by an authorized service center.
-
Page 11: Specifications
SPECIFICATIONS Specifications Model ESL-XTE3 ESL-XTE3F ESL-XTE5 ESL-XTE7 Input Voltage DC40V 0.3-2.9 0.3-2.9 0.5-4.9 0.7-6.9 Torque in-lbs 2-26 2-26 4.3-43.4 6.1-60.7 Max Speed (RPM) 1100 1600 1100 Power Consumption Weight 830g (1.83 lbs) Length 297 mm (11.69 in) ESD Safe RoHS Power Controller DR-XTC1 Bit Type... - Page 12 ESL-XTE Series Transducerized Electric Screwdrivers www.deltaregis.com 7370 Commercial Circle, Fort Pierce, FL 34951 sales@deltaregis.com ( 772.465.4302...