Table of Contents
Advertisement
Troubleshooting
The platter does not spin.
Is the AC adapter connected to the outlet? Connect AC adapter to the outlet.
Has the belt slipped from the platter? Correctly place the belt on the platter.
Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley correctly.
Has the belt been damaged? Replace it with a new belt.
The platter spins, but there is no sound or the volume is not loud enough.
Is the cartridge's protector still attached to the cartridge? Remove the cartridge's protector.
Is the tonearm lifted? Lower the tonearm.
Are the function settings and input for connected equipment (amplifier, etc.) selected correctly? Check
whether the settings for the connected equipment are correct.
Is the stylus damaged? Check the stylus and replace it, if necessary.
Is the stylus placed correctly on the body of the cartridge? Check the cartridge and adjust it, if necessary.
Is the tracking force set too heavy? Adjust the tracking force.
The stylus skips.
Is the tracking force set too light or too heavy? Adjust the tracking force.
Is the anti-skate set improperly? Verify anti-skate is set for same value as cartridge tracking force.
Is the record warped? Check the record.
Is the record scratched? Check the record.
Is the stylus dirty? Excessive accumulation of dirt and dust on the stylus affects the record's playback quality.
There is howling.
Is the product picking up excessive vibrations from the floor, surfaces of the walls, or nearby speakers?
Decrease the vibrations or mount the product on a surface that is not subject to the effects of vibrations.
Is the product mounted on an unstable surface? Check whether the surface on which the product is mounted
is suitable.
There is noise when the record is playing.
Is there dust on the cartridge's stylus tip? If dust is stuck to the stylus tip, clean it with a commercially sold
brush.
30
Advertisement
Table of Contents
