Table of Contents
Advertisement
Handset
Automatic volume control
Crescendo is not set for the ringtone volume (
The phone is able to automatically adjust the volume of the receiver and ringtone to the
ambient volume. Here you can set the sensitivity with which the phone reacts to changes in
noise level (Very High, High, Medium, Low, Very Low).
Settings
Smart Earpiece Vol. / Smart Ringtone Vol.
Enable/disable:
Adjust the sensor:
Save:
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call
volumes, here you can compensate the audio setting characteristics of your headset.
Settings
set the volume
Microphone sensitivity
Adjust the sensitivity of the microphone for the receiver or wired headset. This gives you
improved acoustics in loud environments and when there are echoes.
Settings
select what the setting applies for (Earpiece / Corded headset)
sensitivity
Save
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
Settings
Earpiece Profiles / Handsfree Profiles
Select (
= selected)
Earpiece Profiles: High frequency or Low frequency (default setting)
Handsfree Profiles: Standard (default setting) or Reduced Echo
54
OK
Audio Settings
Activation:
select On or Off
Sensitivity
Save
OK
Audio Settings
Save
OK
Audio Settings
OK
Audio Settings
p. 55).
OK
Edit
adjust the sensor sensitivity
OK
OK
Mic Sensitivity
OK
OK
select profile
Smart Volume
OK
Corded Hdst Boost
OK
adjust the
Acoustic Profiles
Advertisement
Table of Contents
