Gigaset S700 H PRO Manual page 20

Making calls
Initiating ringback
If the line of a called subscriber is busy, you can arrange for a ringback (if the phone system or
provider supports the CCBS and CCNR services).
CCBS (Completion of Call to busy subscriber)
CCNR (Completion of Calls on No Reply)
The service code for enabling/disabling CCBS and CCNR must be configured in the provider
settings.
Enabling ringback:
Enter the service code specified for the phone system / provider, e.g.
If you do not want a ringback, you can disable the function.
Enter the service code specified for the phone system / provider, e.g.
Incoming calls
An incoming call for the connection assigned to your handset is indicated by ringing, by a
display on the screen and by the flashing Talk / Handsfree key
Accept the call:
If Auto Answer is enabled:
Disable ringtone:
Reject the call:
Information about the caller
If it is sent, the number of the caller is displayed. If the caller's number is saved in a directory, the
name is displayed.
Using the Call Manager of the phone system
If a Call Manager is used on the phone system, it is possible to define that incoming calls are
accepted directly by headset or handsfree function. This must be configured for the handset on
the Gigaset N870 IP PRO.
Group accept
Accept incoming calls for a group of subscribers.
Group accept must be enabled, and the phone number or SIP URI of the group must be entered.
This must be configured for the handset on the Gigaset N870 IP PRO.
20
Press the Talk key
Remove the handset from the charging cradle
Silence . . . You can accept the call as long as it is displayed on the
screen
Press the End call key
Ringback when busy
Ringback when call is not answered
.
or Accept