Siemens SIMATIC ET 200SP Manual page 43

Technical specifications
Resistance thermometer (RTD)
Maximum permissible input voltage for voltage input
(destruction limit)
Technical unit for temperature measurement
Cable length
Cable length shielded, max.
Analog value generation
Measuring principle
Integration and conversion time/resolution per channel
Resolution with overrange (bit including sign), max.
Integration time configurable
Basic conversion time including integration time, ms
•
Interference voltage suppression for interference frequency f1
in Hz
Conversion time (per channel)
Smoothing of the measured values
Configurable
Setting: None
Setting: Weak
Setting: Medium
Setting: Strong
Sensors
Wiring the signal transmitters
For voltage measurement
for resistance measurement with 2-wire connection
for resistance measurement with 3-wire connection
for resistance measurement with 4-wire connection
Errors/accuracies
Linearity error (in relation to input range), (+/-)
Temperature error (in relation to input range)
Crosstalk between inputs, min.
Repeat accuracy in settled state at 25 °C
(in relation to input range), (+/-)
Operational limit in entire temperature range
Voltage in relation to input range, (+/-)
Resistance in relation to input range, (+/-)
Basic error limit (operational limit at 25 °C)
Voltage in relation to input range, (+/-)
Resistance in relation to input range, (+/-)
42
Additional processing time for wire break check
Analog input module AI 8xRTD/TC 2-wire HF (6ES7134-6JF00-0CA1)
6ES7134-6JF00-0CA1
30 V
°C/°F/K
200 m; 50 m for thermocouples
Integrating (sigma-delta)
16 bit
Yes
2 ms; in the resistance
thermometer, resistor, and
thermocouple areas
16.6 / 50 / 60 Hz
180 / 60 / 50 ms
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
± 0.01%; +/- 0.1% for resistance
thermometer and resistor
± 0.0009%/K; +/- 0.005%/K for
thermocouple
-50 dB
± 0.05%
± 0.1%
± 0.1%
± 0.05%
± 0.05%
Manual, 02/2014, A5E32942580-AA