Page 1
B W R 4000 016885 v2.2 WWW.NIKOLAOUTOOLS.GR...
Page 2
SAFETY INSTRUCTIONS Please carefully note the following: • When assembling, ensure that the plastic feet covers are correctly attached to the legs and hand-tighten all bolt and screw assemblies. • Never use cross-bars as ladders and don't stand on work-tops. •...
Page 3
ASSEMBLY INSTRUCTIONS Tools required: 1. Screwdriver (Phillips head no.2) 2. Hammer 3. Spanner Step 1: Use bolts (#9), washers (#13) and nuts (#10) to connect the crossbars (#4) and leg frames (#5). Step 2: Use wood screws (#8) to connect the slide bases (#2) and work-tops (#1). Step 3: Fit leg frames (#5) into slide bases (#2), line up the holes in the slide base with the holes in the leg frame, insert bolts (#3) and washers (7#) from outside of the base and attach washers (#7) and nuts (#11) from inside and use a screwdriver and spanner to tighten the screws.
Page 4
ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ Πριν συναρμολογήσετε και χρησιμοποιήσετε τον πάγκο, σημειώστε τα εξής: • Κατά τη συναρμολόγηση, βεβαιωθείτε ότι τα πλαστικά πέλματα των ποδιών είναι σωστά τοποθετημένα στα πόδια και σφίξτε με το χέρι όλα τα μπουλόνια και τις βίδες. • Μη χρησιμοποιείτε οποιοδήποτε σημείο του πάγκου ως σκάλα και μην στέκεστε πάνω στον πάγκο. •...
Page 5
ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ Απαραίτητα εργαλεία 1. Κατσαβίδι (κεφαλή τύπου PH. No2) 2. Σφυρί 3. Κλειδί σύσφιξης Βήμα 1: Χρησιμοποιήστε τις βίδες (9), τις ροδέλες (13) και τα παξιμάδια (10) για να συνδέσετε τις αντηρίδες (4) και τα πλαίσια των ποδιών (5). Βήμα...
Need help?
Do you have a question about the Lite Series and is the answer not in the manual?
Questions and answers