Datalogic PowerScan Retail PBT9501-RT Quick Reference Manual page 14

Industrial cordless handheld area imager bar code reader
Table of Contents

Advertisement

Installing the Battery Pack
As with other types of batteries, Lithium-Ion (LI) batteries
will lose capacity over time. Capacity deterioration is
noticeable after one year of service whether the battery is
in use or not. It is difficult to precisely predict the finite life
of a LI battery, but cell manufacturers rate them at 500
charge cycles. In other words, the batteries should be
expected to take 500 full discharge / charge cycles before
needing replacement. This number is higher if partial dis-
charging / recharging is adhered to rather than full / deep
discharging.
The typical manufacturer advertised useful life of LI bat-
teries is one to three years, depending on usage and num-
ber of charges, etc., after which they should be removed
from service, especially in mission critical applications. Do
not continue to use a battery that is showing excessive
loss of capacity, it should be properly recycled / disposed
of and replaced. For most applications, batteries should
be replaced after one year of service to maintain customer
satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the device
2011/65/EU,
in comply with European Directive 2006/66/EC,
2002/96/EC and 2012/19/EU and subsequent modifica-
tions, US and China regulatory and others laws and regu-
lations about the environment.
4
PowerScan™ Retail PBT9501-RT

Advertisement

Table of Contents
loading

Table of Contents