Table of Contents
Advertisement
Ports and Buttons
Power plug, on/off switch and ports are located on the back and side of the
Xplore Hub.
Back
Ports
Phone1~Phone2
LAN1~LAN4
WAN
WPS
Reset
WLAN
Power
On/Off
Side
Buttons
USB
RJ-11 port is used to connect to the phone through the telephone line
RJ-45 port is used to connect the modem to computer or other
network devices
RJ-45 port is used to connect to your Xplore modem
WLAN Protected Setup
Reset button should not be used unless advised by an Xplore
representative. This button is used to restore the factory default
settings when pressed for more than 5 seconds.
Turn the WLAN on or turn off
Power supply port is connected to the power adapter
Power switch. Power on or power off the Hub
X P L O R E H U B
Description
USB2.0 host port in right panel: Used for
the USB storage device, or printer
Description
U S E R G U I D E
5
Advertisement
Table of Contents
