Make sure you have all the parts shown on the “What’s in the Box?” section. • Make sure your computer, existing Hub, or any other Whole Home Whole Home Wi-Fi Units are disconnected from Xplore Internet access • If you Hub is already installed, please move to step 4...
Page 4
Setting Up Your Hub 5 Hub 5 Step 1: Connect your new Hub to your Modem • Plug one end of the RED ethernet cable into the LAN port on your Modem and the other to the RED WAN port on the new...
Page 5
Connect Your Wi-Fi Units for Whole Home Wi-Fi Step 4: Connect Your Whole Home Wi-Fi The Xplore Whole Home Wi-Fi network enables you to have superior coverage in every room in bigger homes. It does that by deploying one or more Whole Home Wi-Fi Units in different locations to extend your Hub’s...
Page 6
Connect Your Whole Home Wi-Fi Units for Whole Home Wi-Fi (Continued) Press the WPS button on the back of the Hub 5 unit, and then the blue WPS button on the front of the Whole Home Wi-Fi Unit. The light on the Whole Home Wi-Fi Unit will turn blue, once it has synchronized.
Page 7
Wi-Fi service. Managing your Wi-Fi Name and Password Open any web browser on your device Enter 192.168.219.1 in the address bar to access the Hub 5 login screen. The username will be “admin”...