Connect Your Home Phone - Xplore Hub 5 User Manual

Connect Your Wi-Fi Units for Whole Home Wi-Fi
3.
Press the WPS button on the back of the Hub 5 unit, and then
the blue WPS button on the front of the Whole Home Wi-Fi Unit.
The light on the Whole Home Wi-Fi Unit will turn blue, once it has
synchronized.
4.If it does not turn solid blue but rather flashing blue instead, then
the unit may need to be placed closer to the controller unit.
5.
Repeat for the other Whole Home Wi-Fi Units if you have more
than one.
Troubleshooting: If the Whole Home Wi-Fi Unit light flashes in Red,
this indicates failure to sync with the Hub. Repeat steps 1-5 again.
Step 5: Connect Your Home Phone
If you do not have a Home Phone,
you can skip this step.
Connect your telephone by
attaching one end of the
Green Phone Cable to the
Phone1 port of the Xplore
Hub 5, and the other end
to your telephone base unit.
Corresponding Phone LED light
should turn on
For tips on using your Home Phone features, visit
xplore.ca/support/home-phone/managing-your-Xplore-home-phone-features/
X P L O R E H U B
U S E R G U I D E
(Continued)
Hub 5
9