Maintenance And Storage - Racing RAC5176SPM User Manual

B. HOT-STARTING THE ENGINE
a) Pull Engine control lever until it touches the upper handle.
b) Pull the starter rope until the engine starts.
C. STOP THE ENGINE
Release the Engine control lever
5.3 FOR THE SELF-PROPELLED MOWER
To engage the self-propel system, push the self-propel lever on the handle (2) while maintaining engaged
with the engine control lever.
2
To stop the mower, release the self-propelled lever and then the control lever.

6. MAINTENANCE AND STORAGE

Before working on the cutting system of the machine, switch off the engine and remove the spark
plug's cap.
WARNING - Improper maintenance, use of nonconforming replacement components, or the removal or
modification of safety components can cause accidents and the deterioration of the tool.
a. Cleaning the mower
- Cut grass is damp. Regular cleaning after each use will ensure better functioning of the mower and
reduce the risk of corrosion or seizure.
- Having finished mowing, allow the engine to cool then remove accumulated grass clippings from
and around the engine with a brush.
- Clean the grass collection bag annually with a brush or gentle spray of water.
- Disconnect the spark plug's cap and tilt the mower on its side with the air filter and carburettor
uppermost.
- Remove any remaining cut grass from the cutting system with a scraper and a brush.
- Reposition the mower onto its four wheels.
Do not use a pressure washer or hot water to clean the mower. Be careful to avoid soaking parts
-
such as the engine, air cleaner, wheel bearings and metal fastenings. Dry off the machine before
2
14