9.
Startin47 Motor
(b) Series coil continuity
test
Check continuity
between
the S and M
terminals. Good if continuity
exists.
IIEzzJ
(Coil disconnection)
Replace the magnetic switch.
(c) Contact continuity
test
Depress
the magnetic
switch
with the
plunger at the bottom. Check continuity
between
the B and M terminals
with a
multimeter.
Good if continuity
exists.
(Contact continuity
defect)
Replace the magnetic switch.
(6) Pinion clutch
(a) Pinion inspection
Manually
rotate the pinion. Inspect if it is
rotated smoothly
in the driving direction,
and is locked in the opposite direction.
Replace the pinion clutch if abnormal.
Multimeter
Fig. 22
Fig. 23
Fig. 24
9-12