9. Starting Motor
12) Screw M4 (3)
13) Bearing retainer
14) Gear case
Remove
screw
M4, and the bearing
re-
tainer and clutch assy can be removed.
15) Pinion stopper clip
Remove the bearing
retainer at the edge
and the bearing, and shift the pinion stop-
per toward the pinion. Use a plain screw-
driver and pry to remove the pinion stop-
per clip.
16) Pinion stopper
17) Return spring
18) Pinion shaft
19) Clutch Assy
Remove the pinion stopper clip. The pinion
stopper,
return spring,
pinion
shaft and
bearing retainer can be removed.
Disassembly
is completed now.
Fig. 7
r
15
Pinion stopper clip
\
L
Fig. 8
15 16
17
19
Fig. 9
J
9-7