Xplore Whole Home Wi-Fi User Manual page 8

Indicators: Back
Ports Description
RJ-45 port is used to connect the unit to a computer
LAN1 and LAN2
or other network devices.
WAN
RJ-45 port is used to connect to your Xplore modem.
USB 2.0 Host port. Used for USB network storage
USB
device or printer.
WPS
WLAN Protected Setup.
Reset button should not be used unless advised
by an Xplore representative. This button is used to
Reset
restore the factory default settings when pressed
for more than 5 seconds.
X P L O R E W H O L E H O M E W I - F I
4 U S E R G U I D E