Connect A Wireless Device To The Internet - Xplore Whole Home Wi-Fi User Manual

Connect a Wireless Device to the Internet

Ensure that your devices are within range of the Wi-Fi
1
connection (and inside the home).
On the back of your Controller unit, locate your default SSID
2
names on the white sticker. If you have already changed the
SSID name, locate that.
You can chose to connect to either the 2.4 GHz or 5 GHz
channel.
On the wireless device you wish to connect, locate
3
settings then look for the SSID name of your Controller unit
and press Connect. You will be prompted to enter your WLAN
Security passphrase, which is also located on the same
sticker at the back of your Controller unit unless you have
already changed it (see the next page).
You should now be connected to Wi-Fi Internet. Remember to
4
store your password somewhere secure for your convenience.
X P L O R E W H O L E H O M E W I - F I
U S E R G U I D E
Wi-Fi
9