Which Ssid Should I Connect To - Xplore Whole Home Wi-Fi User Manual

Set Your Own SSID Home Network Name and Passphrase (cont'd)
On the right of the Xplore Home screen, click
5
to open the WLAN SSID Configuration section.
In the SSID1 (2.4GHz) section, change the default Xplore
6
SSID Name (your Xplore Wi-Fi unit name) and the WPA
Passphrase to your own SSID name and password, then
press the Apply button to complete the changes.
To open the SSID5 (5 GHz) channel click on SSID5 (5GHz).
To make it easy to find your unit's name on your wireless
device, use the same SSID Name and WPA Passphrase for
each of the channels. Please record these and keep them in a
safe place.

Which SSID should I connect to?

You can connect to either SSID *. The 2.4 GHz is best suited for
wireless devices that are more than 1.5 Meters (5 FT) from the
Xplore Whole Home Wi-Fi Unit. The 5 GHz is best suited for wireless
devices that are 1.5 Meters (5 FT) or less from the Xplore Unit.
*Not all wireless devices support 5 GHz and you may not see your 5 GHz SSID5 in
your device's Wi-Fi Settings.
X P L O R E W H O L E H O M E W I - F I
WLAN Setting
U S E R G U I D E 11