Upper Boom Control Switch; Lower Boom Control Switch; Water Application Rate Scaling Switch; Blast Button - Zamboni FastICE Training Manual

Upper Boom Control Switch

• The upper boom switch initiates or turns off flow from the upper boom.

Lower Boom Control Switch

• The lower boom switch initiates or turns off flow from the lower boom.

Water Application Rate Scaling Switch

• This switch allows the operator to increase or decrease the water flow rate from as low as 50%
of its pre-calibrated value to as high as 150% of its pre-calibrated value.
- The factory-set system flow rates are 10.5 GPM from the Upper Boom and 3.8 GPM
from the Lower Boom at a 5 MPH reference speed. The total flow from both
booms for these flow rates is 14.3 GPM.

Blast Button

• This function allows the operator to apply the maximum water flow rate set in the control
system for up to 10 seconds at a time.
- The factory setting for the maximum water flow rate is 25.7 GPM.
Zamboni FastICE ® Training Manual
DK - 11001
Training Manual
Page 8 of 20