Default Setting - NEC NP100 User Manual

User Controls

Default Setting

Source Lock
When this function is turned "Off", the projector will search for
other signals if the current input signal is lost. When this function is
turned "On", it will only search a specified connection port.
Fan Control
Choose "On" to turn on Fan Control mode. Operate the fan at full
speed continuously to allow for proper high altitude cooling of the
projector.
Lamp Life Reminder
Choose this function to show or to hide the lamp end of life warning
message. The message will show up 100 hours before end of life.
ECO Mode
Choose "On" to dim the projector lamp which will lower power
consumption and extend the lamp life. Choose "Off" to return to
normal mode.
BrilliantColor
TM
Choose "On" to provide true, more vibrant colors.
Power Management
Set the interval of power-off of the system, if there is no signal
input. (In minutes)
English ... 24