Warning Indicator - NEC NP100 User Manual

Installation
English ... 14

Warning Indicator

When the "Power" LED

projector has overheated. The projector will
shut itself down.
When the "Power" LED

sage below displays on-screen, the projector has detected
that the lamp is approaching its end of
this message, change the lamp as soon as possible or contact
your local dealer or our service center.
When the "Power" LED

sage below displays on-screen, it indicates the fan failed.
Stop using the projector and disconnect the
from the electrical outlet, then contact your local dealer or
our service center.
indicator turns red, it indicates the
indicator flashes red and the mes-
life. When you see
indicator flashes red and the mes-
automatically
power cable