Power Supply Specification - Xinje XS Series User Manual

4. Power supply specification

4-1. Power supply specification
The power specification of XSDH series PLC only supports AC power type.
The power specification of XS3 series PLC only supports DC power type.
The power specification of XSLH series PLC only supports DC power type.
(1) AC power type
Item
Rated voltage
Voltage allowable range
Rated frequency
Allowable instantaneous
power off time
Impact current
Maximum power
consumption
Power supply for sensor
Note:
※1: Please use more than 2mm
※2: Even in case of power failure within 10ms, the programmable controller can still continue to work. When the
power is cut off for a long time or the abnormal voltage drops, the programmable controller will stop working and the
output will also be in off state. When the power supply is restored, the programmable controller will automatically
start running.
※3: The grounding terminal FG of basic unit and expansion module can be connected with each other and reliably
grounded (the third kind of grounding).
(2) DC power type
Item
Rated voltage
Voltage allowable range
Input current (basic unit)
Allowable instantaneous
power off time
Impact current
Maximum power
consumption
●
Note: terminal is empty, please do not use it as external wiring or relay terminal.
Interrupt time ≤0.5AC cycle, space ≥1s
Max below 40A 5ms/AC100V max below 60A 5ms/AC200V
24VDC± 10% max 400mA
2
wires for power cables to prevent voltage drop.
Content
AC100V~240V
AC90V~265V
50/60Hz
30W
Content
DC24V
DC21.6V~26.4V
120mA DC24V
10ms DC24V
10A DC26.4V
12W
31