Safety Precautions - Xinje XS Series User Manual

Safety precautions

Before using this product, please read this part carefully and operate after fully understanding the use, safety,
precautions, etc. of the product. Please correctly conduct product wiring under the premise of paying great
attention to safety.
The problems that may arise during the use of the product are basically included in the safety precautions,
which are indicated in two levels of attention and danger. For other unfinished matters, please follow the basic
electrical operation procedures.
When used incorrectly, it may cause danger, moderate injury or minor injury, and property
Attension
damage.
When it is used incorrectly, it may cause danger, cause personal injury or serious injury, and
Danger
may cause serious property damage.
⚫ Confirmation upon receiving the product
Do not install damaged controllers, controllers with missing parts, or controllers with unqualified models.
Danger of injury.
⚫ Product system design
Please design a safety circuit outside the controller to ensure that the whole system can operate safely when the
controller operates abnormally.
There is a risk of misoperation and failure.
Do not tie the control wiring and power wiring together. In principle, they should be separated by 10cm.
It may cause malfunction and product damage.
⚫ Product installation
Before installing the controller, be sure to disconnect all external power supplies.
Danger of electric shock.
Attension
Danger
Attension
Danger
ii