Xinje XS Series User Manual page 13

XS3 series PLC has substantial basic functions and a variety of special functions.
Basic functions

High speed operation
The main processor of XS3 series PLC has a main frequency of 800MHz, which can meet the
requirements of high-speed operation.

Rich expansion modules
XS3 series PLC can support 16 XG series expansion modules.

Multi-communication ports
The basic unit has five communication ports, which support RS232, RS485. It supports LAN port and
EtherCAT communication.

Large memory
XS3 series PLC has 32M user program capacity and 32M data capacity.

6 kinds of programming method
XS3 series PLC support ST, SFC, FBD, CFC, LD and IL.

Rich instruction set
XS3 series PLC supports PLCopen programming specification, and can reference many standard
function libraries to develop proprietary function blocks and instruction libraries.

Real-time clock
XS3 series PLC has built-in clock to control the time.

Easy to install
XS3 series PLC is easy to install. It can be installed directly on the guide rail.
Enhanced special functions

EtherCAT bus
XS3 series PLC supports EtherCAT bus communication, supports up to 32 stations (32-axis motors
can be controlled synchronously), and supports communication with EEPROM slave stations, such as
Xinje-DS5C, Inovance servo, Panasonic EtherCAT servo, Kollmorgen servo, etc.
XS3 series PLC supports 32-channel electronic cam function and connection of EtherCAT remote IO
module through EtherCAT bus.

Ethernet communication
XS3 series PLC supports Ethernet communication, which can realize faster and more stable program /
data download and better real-time performance. It supports PLC access to the Internet, and realizes
remote search, online monitoring, uploading and downloading of PLC program.

High speed counter, up to 200KHz
The basic unit of XS3 series PLC is equipped with 4-channel, 2-phase high-speed counter and
high-speed counting comparator, which can count in two modes: single-phase and AB phase. The
frequency can reach 200kHz.

High speed pulse output, up to 100KHz
XS3 series PLC has 4 pulse output terminals, the frequency up to 100KHz

Interrupt function
XS3 series PLC has 6-channel external interrupt function.
Note: PLC can output high-speed pulses up to 200kHz, but can not guarantee the normal operation of all servos.
Please connect a resistance of about 500 Ω between the output terminal and 24V power supply.
*1
3
*1
.