Specifications - NEC MultiSync LT140 User Manual

6. SPECIFICATIONS

This section provides technical information about the MultiSync LT84/LT140 Projector's performance.
Model Number
Optical
DMD TM
Lens
Lamp
Image Size
Projection Distance
Electrical
Inputs
Video Bandwidth
Color
Horizontal Resolution
Power Requirement
Input Current
Mechanical
Dimensions
Net Weight
Environmental Considerations Operational Temperatures: 41˚ to 95˚F (5˚ to 35˚C), 30 to 85% humidity
Regulations
Digital Light Proccessing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
The specifications are subject to change without notice.
LT84 / LT84G / LT140 / LT140G
Single Chip Digital Micromirror Device(DMD
Manual zoom, manual focus
LT84 : F3.0 – 3.3 f = 28 – 33 mm
LT140 : F2.7 – 3.0 f = 35 – 42 mm
120 W P-VIP lamp
25 – 300 inches (612.5 – 7620 mm) diagonal
3.9 - 40 ft (1.2 - 12.2 m)
Video (NTSC / PAL / PAL60 / SECAM / NTSC4.43)
Horizontal Frequency : 15 – 85 kHz (RGB : 24 kHz or over)
Vertical Frequency : 50 – 85 Hz
RGB: 80 MHz
Reproduction Full color, 16.7 million colors simultaneously.
500 TV lines : NTSC / PAL / YCbCr
300 TV lines : SECAM
RGB LT84 : 800 dots horizontal, 600 dots vertical
LT140 : 1024 dots horizontal, 768 dots vertical
100 – 120 / 200 – 240 VAC, 50 / 60 Hz
2.1 A (100 – 120 VAC) / 1.0A (200 – 240 VAC)
9.3" (W) 2.3" (H) 11.6" (D) / 235mm (W) 58mm (H) 294mm (D) (not including protrusions)
LT84: 5.5 lbs / 2.5 kg, LT140: 5.7 lbs / 2.6 kg
Storage Temperatures:
UL Approved (UL 1950, CSA 950)
Meets DOC Canada requirements
Meets FCC Class A requirements
Meets AS/NZS3548
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
TM ), 800x600 dots (LT84) / 1024x768 dots (LT140)
14˚ to 140˚F (-10˚ to 60˚C), 30 to 85% humidity
E–37